China Dual Phase Steel Flange Manufacturer, Supplier, Factory

SN Valve is a leading China figure-8 blank manufacturer. The Figure-8 Blank is a specially shaped piping accessory that resembles the cross-section of the number ‘8’. It is mainly used in piping systems, especially in the need to isolate or cut off the pipeline medium occasions. Through the installation of 8-word blind plate, you can achieve effective isolation of the pipeline, so as to facilitate the overhaul, maintenance or replacement of other accessories in the pipeline.

Find a huge selection of Plate (PL) Flanges from China at SN Valve. Plate flat welding flange is a kind of flange cut from steel plate with a full flat flange face and a round bore in the center for connection with pipes or other flanges. The connection is usually made by flat welding, i.e., the flange is aligned with the protruding part of the pipe or equipment and then firmly connected by welding.

Find a huge selection of rtj male figure-8 blank from China at SN Valve. RTJ Male Figure-8 Blank is a piping accessory with a special shape and structure, which resembles the cross-section of the figure ‘8’ and has a convex design of the ring connection surface. The blind consists of two flat plates parallel to each other and an intermediate section connecting them to form an ‘8’. The convex design is used to mate with the ring joint flange to achieve a tight seal.

SN Valve is a leading China socket welding 90 degrees elbow manufacturer. Socket welding 90 degrees elbow plays a role in pipeline connection to change the direction of fluid transmission, so that the fluid can be turned at right angles. It is designed with a socket at one end, and the other end is matched with the outside diameter of the pipeline, for insertion into the main pipe for welding. Socket welding 90 degree elbow is mainly used in small diameter, high pressure piping system, especially in the need to strictly control the risk of leakage and higher strength requirements of the occasion, such as petroleum, chemical, electric power and other industries in the pressure piping system.

Socket welding 45 degrees elbow is mainly used to change the direction of transmission of fluid in a piping system by turning it at an angle of 45 degrees. It is designed with a socket at one end and an outer diameter matching the pipeline at the other end, making it easy to insert into the main pipeline for welding. This elbow is usually used in small diameter, high pressure piping systems, such as petroleum, chemical, electric power and other industries in the pressure piping system, to ensure that the fluid in the transmission process is smooth and safe.

Find a huge selection of stainless steel tube sheet from China at SN Valve. Stainless Steel Tube Sheet is a structural material made of stainless steel in the form of a combination of tubes and sheets. It is an alloy with excellent corrosion resistance. It has a chromium content of at least 10.5 per cent and a carbon content of no more than 1.2 per cent, with possible additions of nickel, molybdenum, titanium and other elements to enhance performance.
Corrosion resistance: It is resistant to weak corrosive media such as air, steam and water as well as chemical media such as acids, alkalis and salts.
High strength: stainless steel has high tensile and yield strength, which can meet the needs of various structural applications.
Excellent processing performance: easy to cut, bend, weld and other processing operations, easy to make a variety of shapes and sizes of pipe and plate structure.