Language

Language

Products
SHUANGNENG - Products

China Carbon Steel Flange Manufacturer, Supplier, Factory

Every single member from our large efficiency profits team values customers' requirements and organization communication for Carbon Steel Flange, Flange, Alloy Flange, Dual Phase Steel Flange, Industrial Pipe Fittings, In case you have any comments about our company or products and solutions, make sure you feel free of charge to speak to us, your coming mail might be highly appreciated.
Carbon Steel Flange, We've exported our solutions all over the world, especially the USA and European countries. Furthermore, all of our merchandise are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products and solutions, please don't hesitate to contact us. We are going to try our best to meet your needs.

Related Products

Hot Products

  • Figure-8 Blank

    Figure-8 Blank

    SN Valve is a leading China figure-8 blank manufacturer. The Figure-8 Blank is a specially shaped piping accessory that resembles the cross-section of the number ‘8’. It is mainly used in piping systems, especially in the need to isolate or cut off the pipeline medium occasions. Through the installation of 8-word blind plate, you can achieve effective isolation of the pipeline, so as to facilitate the overhaul, maintenance or replacement of other accessories in the pipeline.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

  • Butt Welding 90 Degrees LR Elbow

    Butt Welding 90 Degrees LR Elbow

    A butt welding 90 degrees lr elbow elbow is a pipe fitting that is connected to a pipe by welding with a 90-degree bending angle and a long bending radius, often referred to as a long radius (LR) elbow. The design of this elbow allows for a smoother flow of fluid through the pipe, reducing flow resistance and pressure loss.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

  • Marine Flange

    Marine Flange

    High quality marine flange is offered by China manufacturer SN Valve. Marine flange is a standardized connecting part, which is usually used in piping system on ships to achieve reliable connection between pipes and pipelines, pipelines and equipments. Marine flanges are mainly used in the transmission system of water, oil, gas and other fluids on ships to ensure the unobstructed flow of fluids. At the same time, the maintenance and replacement of pipelines will be easier, improving the reliability and safety of ships.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

  • Stainless Steel Concentric Cross

    Stainless Steel Concentric Cross

    Stainless Steel Concentric Cross, also known as 4-way pipe connectors, are precision-engineered components designed to split or combine fluid flow across four directions in piping systems. Crafted from high-grade 304, 316, or 316L stainless steel, these fittings excel in corrosive, high-pressure, and extreme-temperature environments, making them ideal for industries like oil and gas, chemical processing, HVAC, and water treatment.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

  • Lap Joint Stub Ends

    Lap Joint Stub Ends

    SN Valve is a leading China lap joint stub ends manufacturer. Lap Joint Stub Ends are short pipe joints with a flanged construction, designed to be butt-welded to the pipe at one end and designed to be used with loose flanges as the connecting surface at the other end. This design allows Lap Joint Stub Ends to make flexible and reliable connections in pipework.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

  • Paddle Blank and Spacer

    Paddle Blank and Spacer

    SN Valve is reputed Paddle Blank and Spacer Manufacturers in CHINA, Our offered Spade and Spacers are normally referred to as Line Blinds, has the similar function as a Spectacle Blind . The Spade or Spacer is fitted in the line between two flanges and is bolted in place. The Spade Ring Spacer is used when the line is required open and the Paddle Blind or Spade is installed when the line is required blocked or closed. To change it from open to closed, only half the bolts need to be removed and the Paddle Spacer is swapped over. The removed bolts are then installed and tightened. The handle from the pipe and provides an indicator of a Spade or Ring Spacer is installed.

    SIZE:
    DN10(3/8") DN15(1/2") DN20(3/4") DN25(1") DN40(1-1/2")
    DN50(2") DN80(3") DN100(4") DN125(5") DN150(6")
    DN200(8") DN250(10") DN300(12") DN350(14") DN400(16")
    DN450(18") DN500(20") DN550(22") DN600(24")
    Customized Size Consult Us

Send Inquiry

About Us

Products

News

Contact Us

Copyright © 2024 Zhejiang Shuangneng Steel Industry Co., Ltd. All Rights Reserved. Links Sitemap RSS XML Privacy Policy

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept