Products

A butt welding 90 degrees lr elbow elbow is a pipe fitting that is connected to a pipe by welding with a 90-degree bending angle and a long bending radius, often referred to as a long radius (LR) elbow. The design of this elbow allows for a smoother flow of fluid through the pipe, reducing flow resistance and pressure loss.

SN Valve is a leading China butt welding 45 degrees short elbow manufacturer. Butt welding 45 degrees short elbow is a pipeline connector manufactured through hot pressing, cold working, welding and other processes, with an angle of 45 degrees, the connection is butt-welding, i.e., the elbow is directly welded to the pipe.

Find a huge selection of rtj male figure-8 blank from China at SN Valve. RTJ Male Figure-8 Blank is a piping accessory with a special shape and structure, which resembles the cross-section of the figure ‘8’ and has a convex design of the ring connection surface. The blind consists of two flat plates parallel to each other and an intermediate section connecting them to form an ‘8’. The convex design is used to mate with the ring joint flange to achieve a tight seal.

SN Valve is reputed Paddle Blank and Spacer Manufacturers in CHINA, Our offered Spade and Spacers are normally referred to as Line Blinds, has the similar function as a Spectacle Blind . The Spade or Spacer is fitted in the line between two flanges and is bolted in place. The Spade Ring Spacer is used when the line is required open and the Paddle Blind or Spade is installed when the line is required blocked or closed. To change it from open to closed, only half the bolts need to be removed and the Paddle Spacer is swapped over. The removed bolts are then installed and tightened. The handle from the pipe and provides an indicator of a Spade or Ring Spacer is installed.

SN Valve is a leading China figure-8 blank manufacturer. The Figure-8 Blank is a specially shaped piping accessory that resembles the cross-section of the number ‘8’. It is mainly used in piping systems, especially in the need to isolate or cut off the pipeline medium occasions. Through the installation of 8-word blind plate, you can achieve effective isolation of the pipeline, so as to facilitate the overhaul, maintenance or replacement of other accessories in the pipeline.

Find a huge selection of bimetallic coated tube sheet from China at SN Valve. Bimetallic Coated Tube Sheet is a composite material with one or more layers of different metal materials coated on the surface of the tube sheet. It usually consists of a base material (e.g. steel, aluminium, etc.) and a coating metal (e.g. copper, zinc, tin, etc., or alloys such as copper-tin, copper-lead-tin, etc.).